[1]张东清.龙凤山气田北209井钻井提速技术[J].石油钻探技术,2016,44(04):22-26.[doi:10.11911/syztjs.201604005]
 ZHANG Dongqing.Enhancement of ROP in Well Bei-209 of the Longfengshan Gas Field[J].Petroleum Drilling Techniques,2016,44(04):22-26.[doi:10.11911/syztjs.201604005]
点击复制

龙凤山气田北209井钻井提速技术(/HTML)
分享到:

《石油钻探技术》[ISSN:1001-0890/CN:11-1763/TE]

卷:
44卷
期数:
2016年04期
页码:
22-26
栏目:
钻井完井
出版日期:
2016-07-25

文章信息/Info

Title:
Enhancement of ROP in Well Bei-209 of the Longfengshan Gas Field
作者:
张东清
中国石化石油工程技术研究院, 北京 100101
Author(s):
ZHANG Dongqing
Sinopec Research Institute of Petroleum Engineering, Beijing, 100101, China
关键词:
机械钻速液动射流冲击器快钻剂井身结构北209井龙凤山气田
Keywords:
penetration ratehydro-efflux hammerfast drilling additivescasing programWell Bei-209Longfengshan Gas Field
分类号:
TE242
DOI:
10.11911/syztjs.201604005
摘要:
针对龙凤山气田钻井中存在的上部地层易塌、下部地层易漏、机械钻速低、钻井周期长等问题,在该油田评价井——北209井进行了钻井提速技术研究与试验,以达到提高机械钻速、缩短钻井周期的目的。在分析龙凤山气田地质资料和地层特点的基础上,通过优化井身结构、采用“PDC钻头+0.5°单弯螺杆”复合钻井技术、选用适合于砾石层的液动射流冲击器、选择机械式无线随钻测斜仪测量井斜、应用SMROP-1快钻剂等关键技术措施,使北209井实现了安全快速钻井,机械钻速达到8.62 m/h,较该气田此前平均机械钻速提高了53.38%;钻井周期40.98 d,比设计钻井周期缩短22.40 d。研究认为,北209井钻井提速技术可为龙凤山气田后续井钻井提速增效提供借鉴。
Abstract:
Drilling operations in the Longfengshan Gas Field are susceptible to borehole collapse in the upper formations, circulation lost in the lower formations, low ROP and prolonged drilling times. To enhance the ROP and to minimize the time in drilling operations, research and experiments on high-speed drilling technologies were carried out for Well Bei-209. Based on the analysis on geological information and the formation characteristics of the Longfengshan Gas Field, well casing program, combined drilling of PDC bit+0.5° single bend PDM, hydro-efflux hammer for gravel layers, mechanical wireless MWD, SMROP-1 fast drilling additives and other key technical measures were adopted to achieve safe and fast drilling of Well Bei-209. Under these conditions, the resulting ROP was 8.62 m/h, 53.28% higher than the average ROP previously achieved in the gas filed. At the same time, the drilling cycle was 40.98 d, 22.40 d shorter than designed. Research results showed that the proposed high-speed drilling techniques for Well Bei-209 could provide references for follow-up operations to enhance the ROP and efficiencies in the Longfengshan Gas Field.

参考文献/References:

[1] 王清江,毛建华,韩贵金,等.定向钻井技术[M].北京:石油工业出版社,2009:146-149.WANG Qingjiang,MAO Jianhua,HAN Guijin,et al.Directional drilling technology[M].Beijing:Petroleum Industry Press,2009:146-149.
[2] 张海平,索忠伟,陶兴华.液动射流式冲击器结构设计及试验研究[J].石油机械,2011,39(7):1-3.ZHANG Haiping,SUO Zhongwei,TAO Xinghua.The structural design and experimental study of the jet-type hydro-hammer[J].China Petroleum Machinery,2011,39(7):1-3.
[3] 吴鹏,韦忠良,吕苗荣,等.射流式液动冲击器优化设计研究[J].石油机械,2014,42(7):24-27,31.WU Peng,WEI Zhongliang,LYU Miaorong,et al.Hydraulic jet hammer design optimization[J].China Petroleum Machinery,2014,42(7):24-27,31.
[4] 罗恒荣,索忠伟,谭勇,等.防托压冲击器在盘40斜501井的应用[J].石油钻探技术,2015,43(5):112-115.LUO Hengrong,SUO Zhongwei,TAN Yong,et al.Application of reducing WOB stack impactor in Well Pan 40-Xie 501[J].Petroleum Drilling Techniques,2015,43(5):112-115.
[5] 王若.随钻测井技术发展史[J].石油仪器,2001,15(2):5-7,15.WANG Ruo.Development history of logging while drilling technology[J].Petroleum Instruments,2001,15(2):5-7,15.
[6] 李大奇,康毅力,刘修善,等.裂缝性地层钻井液漏失动力学模型研究进展[J].石油钻探技术,2013,41(4):42-47.LI Daqi,KANG Yili,LIU Xiushan,et al.Progress in drilling fluid loss dynamics model for fractured formations[J].Petroleum Drilling Techniques,2013,41(4):42-47.
[7] 郭磊,徐博韬,苗海龙,等.新型快钻剂的室内评价及其在渤海油田的应用[J].钻井液与完井液,2013,30(6):21-23.GUO Lei,XU Botao,MIAO Hailong,et al.Laboratory evaluation and field application of fast drilling agent in Bohai Oilfield[J].Drilling Fluid&Completion Fluid,2013,30(6):21-23.

相似文献/References:

[1]许 杰,安文忠,徐荣强.PDC钻头钻复合地层技术在旅大油田的应用[J].石油钻探技术,2008,36(01):76.
[2]侯树刚,刘新义,杨玉坤.气体钻井技术在川东北地区的应用[J].石油钻探技术,2008,36(03):24.
[3]万长根,林于栋,彭汉标.塔河油田沙3区块水平井钻井技术[J].石油钻探技术,2008,36(04):26.
[4]刘 伟,李 丽,贾学钰.高压气井CX488井天然气欠平衡压力钻井技术[J].石油钻探技术,2007,35(02):21.
[5]丁 红,陈 杰,陈志学,等.垂直钻井技术在青探1井的应用[J].石油钻探技术,2007,35(03):30.
[6]常 领,陈华忠.PDC钻头在胜利油田深井钻井中的应用[J].石油钻探技术,2007,35(04):92.
[7]刘玉民,金志富,张洪君,等.大庆油田油层套管钻井技术研究[J].石油钻探技术,2007,35(05):22.
[8]罗恒荣,唐玉响,徐玉超,等.新型定向井PDC钻头的研制与应用[J].石油钻探技术,2007,35(05):86.
[9]倪益民,袁永嵩,赵金海,等.胜利油田两口超短半径侧钻水平井的设计与施工[J].石油钻探技术,2007,35(06):57.
[10]蒋宏伟,刘永胜,翟应虎,等.旋冲钻井破岩力学模型的研究[J].石油钻探技术,2006,34(01):13.

备注/Memo

备注/Memo:
收稿日期:2016-03-08;改回日期:2016-06-14。
作者简介:张东清(1974-),男,河北枣强人,1998年毕业于西南石油学院石油工程专业,2007年获西安石油大学石油与天然气专业工程硕士学位,高级工程师,主要从事钻井工程技术研究与管理工作。E-mail:zhangdq.sripe@sinopec.com。
更新日期/Last Update: 1900-01-01