[1]张金成,艾军,臧艳彬,等.涪陵页岩气田“井工厂”技术[J].石油钻探技术,2016,44(03):9-15.[doi:10.11911/syztjs.201603002]
 ZHANG Jincheng,AI Jun,ZANG Yanbin,et al.Multi-Well Pad Technology in the Fuling Shale Gas Field[J].Petroleum Drilling Techniques,2016,44(03):9-15.[doi:10.11911/syztjs.201603002]
点击复制

涪陵页岩气田“井工厂”技术(/HTML)
分享到:

《石油钻探技术》[ISSN:1001-0890/CN:11-1763/TE]

卷:
44卷
期数:
2016年03期
页码:
9-15
栏目:
钻井完井
出版日期:
2016-05-25

文章信息/Info

Title:
Multi-Well Pad Technology in the Fuling Shale Gas Field
作者:
张金成1 艾军2 臧艳彬1 杨海平3 陈小锋1
1. 中国石化石油工程技术研究院, 北京 100101;
2. 中石化重庆涪陵页岩气勘探开发有限公司, 重庆 408014;
3. 中石化江汉石油工程有限公司钻井一公司, 湖北潜江 433123
Author(s):
ZHANG Jincheng1 AI Jun2 ZANG Yanbin1 YANG Haiping3 CHEN Xiaofeng1
1. Sinopec Research Institute of Petroleum Engineering, Beijing, 100101, China;
2. Sinopec Chongqing Fuling Shale Gas Exploration and Development Company, Chongqing, 408014, China;
3. No.1 Drilling Company, Sinopec Jianghan Oilfield Service Corporation, Qianjiang, Hubei, 433123, China
关键词:
页岩气"井工厂"技术钻井压裂撬装化涪陵页岩气田
Keywords:
shale gasmulti-well paddrillingfracturingskid-mountedFuling Shale Gas Field
分类号:
TE249;TE371
DOI:
10.11911/syztjs.201603002
摘要:
涪陵页岩气田是我国第一个投入商业化开发的国家级页岩气示范区,经过3年的技术攻关和现场试验及应用,形成了一套适合复杂山地页岩气特点的"井工厂"技术,极大地缩短了开发周期,降低了工程成本。涪陵页岩气田"井工厂"关键技术主要包括山地"井工厂"布局优化设计、页岩气"井工厂"钻井作业模式、"井工厂"压裂作业模式以及撬装化建站等4个方面。现场试验与推广应用情况表明,采用单钻机2~4井和双钻机5~8井"井工厂"钻井模式,单机组拉链式"井工厂"压裂与双机组同步"井工厂"压裂模式,可以达到当年完成建平台、钻井、压裂、试气、投产的开发要求。"井工厂"技术为涪陵页岩气田50×108 m3/a一期产能建设的顺利完成提供了强有力的技术支撑,并成为页岩气田经济开发的核心技术,对我国页岩气规模化开发具有重要的借鉴和引领作用。
Abstract:
The Fuling Shale Gas Field is the first commercial development of shale gas in China and thus is now a national demonstration area. After three years of research and development, the Gas Field had developed "multi-well pad" technologies to cope with requirements presented by shale gas developed in complex mountain areas. These technologies could significantly reduce the time and costs required for the development of shale gas. This paper reviews key "multi-well pad" technologies developed in the Fuling Shale Gas Field from four aspects:first, optimized deployment and design of well patterns, second, drilling operations in the "multi-well pad" system for shale gas development, third, fracturing operations in the "multi-well pad" system for shale gas development and fourth, construction or skid-mounted stations. Field tests and application performances showed that the combination of "multi-well pad" drilling operations involving a single rig for 2-4 wells or two rigs for 5-8 wells with zipper fracturing with one fracturing unit or synchronous fracturing with two fracturing units could fully satisfy development demands related to accomplish of platform construction, drilling, fracturing, well testing and commercial production within the same year. In addition to providing construction of 50×108 m3 productivity in Phase 1 development of the Fuling Shale Gas Field with reliable technical supports, the "multi-well pad" system has become the core technology for economic development of shale gas fields. In fact, these technologies might provide necessary guidance for large-scale development of shale gas in China.

参考文献/References:

[1] HUMMES O,BOND P R,SYMONS W,et al.Using advanced drilling technology to enable well factory concept in the Marcellus shale[R].SPE 151466,2012.
[2] BROWN K M,BEATTIE K,KOHUT C.High-angle gyro-while-drilling technology delivers an economical solution to accurate wellbore placement and collision avoidance in high-density multilateral pad drilling in the Canadian oil sands[R].SPE 151431,2012.
[3] 刘社明,张明禄,陈志勇,等.苏里格南合作区工厂化钻完井作业实践[J].天然气工业,2013,33(8):64-69. LIU Sheming,ZHANG Minglu,CHEN Zhiyong,et al.Factory-like drilling and completion practices in the joint gas development zone of the South Sulige Project[J].Natural Gas Industry,2013,33(8):64-69.
[4] 赵文彬.大牛地气田DP43水平井组的井工厂钻井实践[J].天然气工业,2013,33(6):60-65. ZHAO Wenbin.Drilling practice of a well plant in the cluster horizontal wells of DP43 in the Daniudi Gas Field,Ordos Basin[J].Natural Gas Industry,2013,33(6):60-65.
[5] 李克智,何青,秦玉英,等."井工厂"压裂模式在大牛地气田的应用[J].石油钻采工艺,2013,35(1):68-71. LI Kezhi,HE Qing,QIN Yuying,et al.Application of "well plant" fracturing mode in Daniudi Gas Field[J].Oil Drilling & Production Technology,2013,35(1):68-71.
[6] 李鹴,Hii King-Kai,Todd Franks,等.四川盆地金秋区块非常规天然气工厂化井作业设想[J].天然气工业,2013,33(6):54-59. LI Shuang,KING-KAI H,FRANKS T,et al.Design highlights of factory-like production of unconventional natural gas wells in the Jinqiu Block,Sichuan Basin[J].Natural Gas Industry,2013,33(6):54-59.
[7] 张金成,孙连忠,王甲昌,等."井工厂"技术在我国非常规油气开发中的应用[J].石油钻探技术,2014,42(1):20-25. ZHANG Jincheng,SUN Lianzhong,WANG Jiachang,et al.Application of multi-well pad in unconventional oil and gas development in China[J].Petroleum Drilling Techniques,2014,42(1):20-25.
[8] 牛新明.涪陵页岩气开发钻井技术难题及对策[J].石油钻探技术,2014,42(4):1-6. NIU Xinming.Drilling technology challenges and resolutions in Fuling Shale Gas Field[J].Petroleum Drilling Techniques,2014,42(4):1-6.
[9] 周贤海.涪陵焦石坝区块页岩气水平井钻井完井技术[J].石油钻探技术,2013,41(5):26-30. ZHOU Xianhai.Drilling & completion techniques used in shale gas horizontal wells in Jiaoshiba Block of Fuling Area[J].Petroleum Drilling Techniques,2013,41(5):26-30.
[10] 王志刚.涪陵焦石坝地区页岩气水平井压裂改造实践与认识[J].石油与天然气地质,2014,35(3):425-430. WANG Zhigang.Practice and cognition of shale gas horizontal well fracturing stimulation in Jiaoshiba of Fuling Area[J].Oil & Gas Geology,2014,35(3):425-430.
[11] 路保平.中国石化页岩气工程技术进步及展望[J].石油钻探技术,2013,41(5):1-8. LU Baoping.Sinopec engineering technical advance and its developing tendency in shale gas[J].Petroleum Drilling Techniques,2013,41(5):1-8.
[12] 艾军,张金成,臧艳彬,等.涪陵页岩气田钻井关键技术[J].石油钻探技术,2014,42(5):9-15. AI Jun,ZHANG Jincheng,ZANG Yanbin,et al.The key drilling technologies in Fuling Shale Gas Field[J].Petroleum Drilling Techniques,2014,42(5):9-15.
[13] 周贤海,臧艳彬.涪陵地区页岩气山地"井工厂"钻井技术[J].石油钻探技术,2015,43(3):45-49. ZHOU Xianhai,ZANG Yanbin.Application of "well factory" drilling technology in the Fuling Shale Gas Field[J].Petroleum Drilling Techniques,2015,43(3):45-49.

相似文献/References:

[1]孙海成,汤达祯,蒋廷学. 页岩气储层裂缝系统影响产量的数值模拟研究[J].石油钻探技术,2011,39(05):63.[doi:10.3969/j.issn.1001-0890.2011.05.014]
 [J].Petroleum Drilling Techniques,2011,39(03):63.[doi:10.3969/j.issn.1001-0890.2011.05.014]
[2]王海涛.页岩气探井测试压裂方案设计与评价[J].石油钻探技术,2012,40(01):12.[doi:10.3969/j.issn.1001-0890.2012.01.003]
 Wang Haitao.Design and Evaluation of Mini-Frac Scheme in Shale Gas Exploration Well[J].Petroleum Drilling Techniques,2012,40(03):12.[doi:10.3969/j.issn.1001-0890.2012.01.003]
[3]姜宝益,李治平,巨亚锋,等.修正的产量不稳定法预测页岩气动态储量[J].石油钻探技术,2012,40(02):66.[doi:10.3969/j.issn.1001-0890.2012.02.013]
 Jiang Baoyi,Li Zhiping,Ju Yafeng,et al.Prediction of Dynamic Reserves of Shale Gas with Modified Flow Rate Transient Approach[J].Petroleum Drilling Techniques,2012,40(03):66.[doi:10.3969/j.issn.1001-0890.2012.02.013]
[4]薛承瑾.国内页岩气有效开采值得关注的几个问题[J].石油钻探技术,2012,40(04):1.[doi:10.3969/j.issn.1001-0890.2012.04.001]
 Xue Chengjin.Noteworthy Issues on Effective Production of Shale Gas Resource in China[J].Petroleum Drilling Techniques,2012,40(03):1.[doi:10.3969/j.issn.1001-0890.2012.04.001]
[5]陈勉,金衍.基于岩心分析的页岩气压裂工艺参数优选[J].石油钻探技术,2012,40(04):7.[doi:10.3969/j.issn.1001-0890.2012.04.002]
 Chen Mian,Jin Yan.Shale Gas Fracturing Technology Parameters Optimization Based on Core Analysis[J].Petroleum Drilling Techniques,2012,40(03):7.[doi:10.3969/j.issn.1001-0890.2012.04.002]
[6]李庆辉,陈勉,金衍,等.页岩气储层岩石力学特性及脆性评价[J].石油钻探技术,2012,40(04):17.[doi:10.3969/j.issn.1001-0890.2012.04.004]
 Li Qinghui,Chen Mian,Jin Yan,et al.Rock Mechanical Properties and Brittleness Evaluation of Shale Gas Reservoir[J].Petroleum Drilling Techniques,2012,40(03):17.[doi:10.3969/j.issn.1001-0890.2012.04.004]
[7]王金磊,黑国兴,赵洪学.昭通YSH1-1页岩气水平井钻井完井技术[J].石油钻探技术,2012,40(04):23.[doi:10.3969/j.issn.1001-0890.2012.04.005]
 Wang Jinlei,Hei Guoxing,Zhao Hongxue.Drilling & Completion Techniques Used in Shale Gas Horizontal Well YSH1-1 in Zhaotong Block[J].Petroleum Drilling Techniques,2012,40(03):23.[doi:10.3969/j.issn.1001-0890.2012.04.005]
[8]姜政华,童胜宝,丁锦鹤.彭页HF-1页岩气水平井钻井关键技术[J].石油钻探技术,2012,40(04):28.[doi:10.3969/j.issn.1001-0890.2012.04.006]
 Jiang Zhenghua,Tong Shengbao,Ding Jinhe.Key Technologies Adopted for Shale Gas Horizontal Well Pengye HF-1[J].Petroleum Drilling Techniques,2012,40(03):28.[doi:10.3969/j.issn.1001-0890.2012.04.006]
[9]范落成,杨兴福,王华,等.阳离子乳液聚合物钻井液在页岩气井的应用[J].石油钻探技术,2012,40(04):38.[doi:10.3969/j.issn.1001-0890.2012.04.008]
 Fan Luocheng,Yang Xingfu,Wang Hua,et al.Application of Cationic Emulsion Polymer Drilling Fluid in Shale Gas Well[J].Petroleum Drilling Techniques,2012,40(03):38.[doi:10.3969/j.issn.1001-0890.2012.04.008]
[10]蒋廷学.页岩油气水平井压裂裂缝复杂性指数研究及应用展望[J].石油钻探技术,2013,41(02):7.[doi:10.3969/j.issn.1001-0890.2013.02.002]
 Jiang Tingxue.The Fracture Complexity Index of Horizontal Wells in Shale Oil and Gas Reservoirs[J].Petroleum Drilling Techniques,2013,41(03):7.[doi:10.3969/j.issn.1001-0890.2013.02.002]

备注/Memo

备注/Memo:
收稿日期:2015-12-25;改回日期:2016-03-07。
基金项目:中国石化科技攻关项目"页岩气‘井工厂’技术研究"(编号:P13138)部分研究内容。
作者简介:张金成(1963-),男,河南社旗人,1985年毕业于华东石油学院钻井工程专业,1988年获石油大学(北京)油气田开发工程专业硕士学位,2007年获中国科学院力学研究所工程力学专业博士学位,教授级高级工程师,主要从事深井超深井钻井提速技术、页岩气钻井技术与钻井工程设计方面的研究工作。E-mail:zhangjc.sripe@sinopec.com。
更新日期/Last Update: 1900-01-01