[1]高应运.延川南煤层气田V形水平井组压裂技术[J].石油钻探技术,2016,44(03):83-87.[doi:10.11911/syztjs.201603015]
 GAO Yingyun.Fracturing Technology for a V-Shaped Horizontal Well Cluster in the Yanchuannan CBM Field[J].Petroleum Drilling Techniques,2016,44(03):83-87.[doi:10.11911/syztjs.201603015]
点击复制

延川南煤层气田V形水平井组压裂技术(/HTML)
分享到:

《石油钻探技术》[ISSN:1001-0890/CN:11-1763/TE]

卷:
44卷
期数:
2016年03期
页码:
83-87
栏目:
油气开发
出版日期:
2016-05-25

文章信息/Info

Title:
Fracturing Technology for a V-Shaped Horizontal Well Cluster in the Yanchuannan CBM Field
作者:
高应运
中国石化华东油气分公司石油工程技术研究院, 江苏南京 210031
Author(s):
GAO Yingyun
Petroleum Engineering Technology Research Institute, Sinopec East China Company, Nanjing, Jiangsu, 210031, China
关键词:
煤层气压裂V形水平井组压裂液支撑剂延5-V1井组延川南煤层气田
Keywords:
CBMfracturingV-shaped horizontal well clusterfracturing fluidproppantYan 5-V1 well clusterYanchuannan CBM Field
分类号:
TE377
DOI:
10.11911/syztjs.201603015
摘要:
延川南煤层气田存在单井产气量低、生产成本高和投资回收期长的问题,为此,进行了煤层气V形水平井组压裂技术研究。在统计该气田已压裂井裂缝方位的基础上,预测待压裂井的裂缝方位,依据煤层厚度及2口水平井水平段的埋深与夹角设计裂缝位置及裂缝长度,并优选分段压裂工艺、压裂液、支撑剂及压裂参数,形成了延川南煤层气V形水平井组压裂技术。该压裂技术在延川南煤层气田3组V形水平井组进行了应用,累计压裂29段,平均每段用液量881 m3、加砂量49.4 m3,压裂成功率90%,平均产气量是定向井的6.18倍,投入产出比低于定向井。现场应用表明,煤层气V形水平井组压裂技术可以提高单井产气量,降低生产成本,缩短投资回收期。
Abstract:
The Yanchuannan CBM Field is characterized by low single-well gas production, high production cost, and long payback period to recover the initial investment. In order to solve these problems, the V-shaped horizontal well cluster fracturing technology was studied for CBM development. Based on the statistics of fracture azimuths in the wells fractured in this CBM Field, it was possible to predict the fracture azimuths of wells to be fractured. Considering the coalbed thickness and the burial depth as well as inclined angle of horizontal section in two horizontal wells, the fracture positions and lengths were designed. After optimizing staged fracturing, fracturing fluids, proppant and fracturing parameters, the fracturing technology for V-shaped horizontal well cluster in the Yanchuannan CBM Field was established. This technology was applied in three V-shaped horizontal well clusters in the South Yanchuan CBM Field, cumulative fracturing were 29 stages, average fluid volume in each stage was 881 m3,the proppant volume added was 49.4 m3. As a result, the fracturing success ratio reached 90%, the average gas production of horizontal well was 6.18 times of that of directional well, and the input-output ratio was higher than that of the directional well. Field applications demonstrated that the fracturing technology for a V-shaped horizontal well cluster can enhance single-well CBM production, reduce the production cost, and shorten the payback period of investment.

参考文献/References:

[1] 杨力.延川南煤层气工区地层漏失特点及对策[J].中国煤层气,2011,8(3):8-10. YANG Li.Characteristics and counter-measures against loss of circulation in strata in Yanchuannan CBM work section[J].China Coalbed Methane,2011,8(3):8-10.
[2] 路艳霞,张飞燕,吴英.延川南地区煤层气资源潜力分析[J].煤,2011,20(8):55-57,83. LU Yanxia,ZHANG Feiyan,WU Ying.Coalbed methane potential analysis in Yanchuan South District[J].Coal,2011,20(8):55-57,83.
[3] 龙志平,袁明进,朱智超.延川南煤层气V型水平井组钻井关键技术研究[J].中国煤层气,2012,12(6):12-15. LONG Zhiping,YUAN Mingjin,ZHU Zhichao.Study on key drilling techniques on CBM V-type horizontal well grouping in Yanchuan South[J].China Coalbed Methane,2012,12(6):12-15.
[4] 杜发勇,张恩仑,张学政,等.压裂施工中管路摩阻计算方法分析与改进意见探讨[J].钻采工艺,2002,25(5):41-43. DU Fayong,ZHANG Enlun,ZHANG Xuezheng,et al.The analysis and improvement of friction calculation method in fracturing operation[J].Drilling & Production Technology,2002,25(5):41-43.
[5] 张高群,刘通义.煤层压裂液和支撑剂的研究及应用[J].油田化学,1999,16(1):17-20. ZHANG Gaoqun,LIU Tongyi.Hydrofracturing fluid and proppant for coalbed gas reservoirs:research and use[J].Oilfield Chemistry,1999,16(1):17-20.
[6] 辛军,郭建春,赵金洲,等.砂泥岩交互储层支撑剂导流能力实验及应用[J].西南石油大学学报(自然科学版),2010,32(3):80-84. XIN Jun,GUO Jianchun,ZHAO Jinzhou,et al.Experimental study on and field appliance of proppant conductivity in alternating formations of sandstone and shale[J].Journal of Southwest Petroleum University(Science & Technology Edition),2010,32(3):80-84.
[7] 张鹏.煤层气井压裂液流动和支撑剂分布规律研究[D].东营:中国石油大学(华东)石油工程学院,2011:42-45. ZHANG Peng.Fracturing fluid flow and proppant distributing law in CBM well[J].Dongying:China University of Petroleum(Huadong),School of Petroleum Engineering,2011:42-45.
[8] 付玉,郭肖,龙华.煤层气储层压裂水平井产能计算[J].西南石油学院学报,2003,25(3):44-46. FU Yu,GUO Xiao,LONG Hua.Production method of fracturing horizontal well in coalbed gas[J].Journal of Southwest Petroleum Institute,2003,25(3):44-46.
[9] 张洪,何爱国,杨风斌,等."U"型井开发煤层气适应性研究[J].中外能源,2011,16(12):33-36. ZHANG Hong,HE Aiguo,YANG Fengbin,et al.Study on the adaptability of the U-shape wells on developing the coalbed methane[J].Sino-Global Energy,2011,16(12):33-36.
[10] CIPOLLA C L.Modeling production and evaluating fracture performance in unconventional gas reservoirs[J].Journal of Petroleum Technology,2009,61(9):84-90.
[11] FALLAHZADEH S A H,SHADIZADEH R S,POURAFSHARY P.Dealing with the challenges of hydraulic fracture initiation in deviated-cased perforated boreholes[R].SPE 132797,2010.

相似文献/References:

[1]谢润成,周 文,高雅琴,等.致密砂岩气藏难动用储量压裂效果综合评价[J].石油钻探技术,2008,36(06):75.
[2]张兴福,何勇明,赵子刚,等.稠油油藏压裂增产新模型及裂缝导流能力研究[J].石油钻探技术,2007,35(02):67.
[3]杨胜来,邱吉平,何建军,等.高温高压下CO2泡沫压裂液摩阻计算研究[J].石油钻探技术,2007,35(06):1.
[4]郑爱玲,王新海,刘德华.注气驱替煤层气数值模拟研究[J].石油钻探技术,2006,34(02):55.
[5]何勇明,王允诚,王厉强,等.稠油油藏污染井产能模型及压裂增产模型研究[J].石油钻探技术,2006,34(02):58.
[6]吴月先,马发明,赵业荣,等.酸化与加砂压裂协同作业技术及其优势[J].石油钻探技术,2009,37(01):69.
[7]何理鹏,宁正福,薛永超,等.低渗油藏压裂直井最小流压界限求解及应用[J].石油钻探技术,2010,38(03):80.[doi:10.3969/j.issn.1001-0890.2010.03.018]
[8]袁帅,李春兰,曾保全,等.压裂水平井裂缝参数优化实验[J].石油钻探技术,2010,38(04):99.[doi:10.3969/j.issn.1001-0890.2010.04.024]
[9]崔海林,陈建隆,牛洪波,等. 胜利油田首口小井眼长水平段水平井钻井技术[J].石油钻探技术,2011,39(05):14.[doi:10.3969/j.issn.1001-0890.2011.05.003]
 [J].Petroleum Drilling Techniques,2011,39(03):14.[doi:10.3969/j.issn.1001-0890.2011.05.003]
[10]魏晓东,赵军,刘清友,等. 煤层气钻机与井控装备现状及发展方向[J].石油钻探技术,2011,39(05):96.[doi:10.3969/j.issn.1001-0890.2011.05.021]
 [J].Petroleum Drilling Techniques,2011,39(03):96.[doi:10.3969/j.issn.1001-0890.2011.05.021]

备注/Memo

备注/Memo:
收稿日期:2015-12-08;改回日期:2016-02-01。
基金项目:中石化石油工程技术服务有限公司先导试验和推广应用项目"延川南区块V、U型井分段压裂技术"(编号:SG12085)部分研究内容。
作者简介:高应运(1987-),男,江苏南京人,2010年毕业于东北石油大学石油工程专业,工程师,主要从事储层改造工艺研究和压裂现场技术服务工作。E-mail:gaoyingyun@163.com。
更新日期/Last Update: 1900-01-01