[1]于法浩,蒋召平,白健华,等.渤海油田稠油水平井防砂筛管耐温能力的确定[J].石油钻探技术,2018,46(06):65-70.[doi:10.11911/syztjs.2018010]
 YU Fahao,JIANG Zhaoping,BAI Jianhua,et al.Determination of the Temperature Resistance Capacity of Sand Control Screen Liner in Horizontal Heavy Oil Wells in the Bohai Oilfield[J].Petroleum Drilling Techniques,2018,46(06):65-70.[doi:10.11911/syztjs.2018010]
点击复制

渤海油田稠油水平井防砂筛管耐温能力的确定(/HTML)
分享到:

《石油钻探技术》[ISSN:1001-0890/CN:11-1763/TE]

卷:
46卷
期数:
2018年06期
页码:
65-70
栏目:
钻井完井
出版日期:
2018-11-25

文章信息/Info

Title:
Determination of the Temperature Resistance Capacity of Sand Control Screen Liner in Horizontal Heavy Oil Wells in the Bohai Oilfield
作者:
于法浩 蒋召平 白健华 刘义刚 孟祥海
中海石油(中国)有限公司天津分公司, 天津 300459
Author(s):
YU Fahao JIANG Zhaoping BAI Jianhua LIU Yigang MENG Xianghai
Tianjin Branch, CNOOC China Limited, Tianjin, 300459, China
关键词:
稠油热采水平井防砂筛管弯曲应力热应力数值模拟渤海油田
Keywords:
heavy oil thermal recoveryhorizontal wellsand control screen linerbending stressthermal stressnumerical simulationBohai Oilfield
分类号:
TE358+.1
DOI:
10.11911/syztjs.2018010
摘要:
渤海油田热采水平井防砂筛管选型时参考的耐温能力未考虑井况的影响,导致部分热采水平井选用的防砂筛管不能满足注热要求而发生破坏。为此,在分析稠油热采水平井防砂筛管注热时受力的基础上,综合考虑弯曲应力与热应力对防砂筛管破坏的影响,给出了稠油热采水平井防砂筛管耐温能力的数值模拟计算方法。利用该方法计算了渤海油田6口热采水平井防砂筛管的耐温能力,分析了单位狗腿严重度下星孔、金属网布和桥式复合3种防砂筛管的耐温能力降低幅度。研究发现:考虑弯曲应力计算出的耐温能力与现场实际较吻合;单位狗腿严重度下星孔、金属网布和桥式复合3种防砂筛管耐温能力降低6~16℃;单位狗腿严重度下防砂筛管耐温能力的降低幅度随防砂筛管径向尺寸增大而增大;防砂筛管基管钢级越高,耐温能力降低幅度越小,且钢级对耐温能力降低幅度的影响程度大于径向尺寸;TP110H和BG110H钢级的金属网布或桥式复合防砂筛管具有较高的耐温能力,能满足渤海油田热采水平井的注热要求。研究结果表明,稠油热采水平井选择防砂筛管时,应考虑弯曲应力对防砂筛管耐温能力的影响,否则会导致防砂失效,影响稠油热采开发效果。
Abstract:
The current reference temperature resistance capacity for sand control screen liner selection of thermal recovery wells in Bohai Oilfield did not take account the influence of well conditions.Consequently,there was a breakdown of selected sand control screen liner in some thermal recovery wells because they failed to meet the requirements of heat injection.To solve the problem,researchers developed a numerical simulation method for calculating screen liner temperature resistance ability in thermal horizontal wells by means of the mechanical analysis of sand control screen liner in heat injecting conditions.Further,they considered the impact of bending and thermal stress on screen liner failure.Using this method,the temperature resistance capacity of sand control screen liner in six thermal recovery horizontal wells in Bohai Oilfield was calculated.Next,the reduction range of temperature resistance capacity of three types of sand control screen liner,i.e.star mesh,metal mesh and bridge-type composite under unit dog leg severity was analyzed.The results showed that the temperature resistance calculated under the bending stress was in good agreement with the actual situation.In fact,the temperature resistance of three types of sand control screen liner under unit dog leg severity was reduced by 6-16℃.Further,the reduction range of temperature resistance of sand control screen liner under unit dog leg severity increased with sand control screen line size.The higher steel grade of sand control screen liner generated a more limited range of reduced temperature resistance,and the influence of the degree of steel grade was greater than that of screen liner size.The grade TP110H,BG110H metal mesh or bridge-type composite sand control screen liner had high temperature resistance and could meet the heat injection requirements of thermal recovery wells in Bohai Oilfield.Therefore,we could conclude that the effect of bending stress on the temperature resistance capacity of sand control screen liner should be taken into account for selecting sand control screen liner for thermal recovery of heavy oil in horizontal wells.Notably,failing to consider it might cause the failure of sand control,and further affect the development effect of heavy oil thermal recovery.

参考文献/References:

[1] 王兆会,高德利.热采井套管损坏机理及控制技术研究进展[J].石油钻探技术,2003,31(5):46-48. WANG Zhaohui,GAO Deli.The casing damage mechanisms and its control in thermal recovery wells[J].Petroleum Drilling Techniques,2003,31(5):46-48.
[2] 王廷瑞,王新卯.五口热采井套管损坏原因分析[J].石油钻探技术,1995,23(1):18-20. WANG Tingrui,WANG Xinmao.Cause analysis of casing damage in five thermal recovery wells[J].Petroleum Drilling Techniques,1995,23(1):18-20.
[3] 赵益忠,孙磉礅,高爱花,等.稠油油藏蒸汽吞吐井长效防砂技术[J].石油钻探技术,2014,42(3):90-94. ZHAO Yizhong,SUN Sangdun,GAO Aihua,et al.Long-term sand control technology for multiple round steam huff and puff wells in heavy oil reservoirs[J].Petroleum Drilling Techniques,2014,42(3):90-94.
[4] 罗蒙,王俐,李良庆.热采井用筛管热应力试验技术研究[J].宝钢技术,2013(3):39-44. LUO Meng,WANG Li,LI Liangqing,et al.Research on thermal stress experiment technique for sieve tubes used in thermal recovery wells[J].Bao-Steel Technology,2013(3):39-44.
[5] SMITH K,BOWEN E.Testing results of an economical mesh screen for thermal application[R].SPE 170010,2014.
[6] 隋晓东.热采水平井完井管柱受力分析及优化技术研究[D].东营:中国石油大学(华东),2011. SUI Xiaodong.Completion tubing stress analysis and optimization technology research of thermal horizontal wells[D].Dongying:China University of Petroleum(Huadong),2011.
[7] 陈庭根,管志川.钻井工程理论与技术[M].东营:石油大学出版社,2000:166-172. CHEN Tinggen,GUAN Zhichuan.Theory and techniques of drilling engineering[M].Dongying:Petroleum University Press,2000:166-172.
[8] 王德新,于润桥.套管柱在水平井弯曲井段的可下入性[J].石油钻探技术,1997,25(1):12-13,40. WANG Dexin,YU Runqiao.Trip ability of casing string in the curved interval of horizontal well[J].Petroleum Drilling Techniques,1997,25(1):12-13,40.
[9] 高德利,高宝奎.水平井段管柱屈曲与摩阻分析[J].石油大学学报(自然科学版),2000,24(2):1-3. GAO Deli,GAO Baokui.Effects of turular buckling on torque and drag in horizontal well[J].Journal of the University of Petroleum,China(Edition of Natural Science),2000,24(2):1-3.
[10] 刘坤芳,张兆银,孙晓明,等.注蒸汽井套管热应力分析及管柱强度设计[J].石油钻探技术,1994,22(4):36-40. LIU Kunfang,ZHANG Zhaoyin,SUN Xiaoming,et al.Analyses of steam-injected well casing thermal stress and casing string strength design[J].Petroleum Drilling Techniques,1994,22(4):36-40.
[11] 李静,林承焰,杨少春,等.套管-水泥环-地层耦合系统热应力理论解[J].中国石油大学学报(自然科学版),2009,33(2):63-69. LI Jing,LIN Chengyan,YANG Shaochun,et al.Theoretical solution of thermal stress for casing-cement-formation coupling system[J].Journal of China University of Petroleum(Edition of Natural Science),2009,33(2):63-69.
[12] 吴建平.防砂筛管受热变形分析[J].石油钻采工艺,2010,32(1):45-49. WU Jianping.Analyzing on sand control screen thermal deformation[J].Oil Drilling & Production Technology,2010,32(1):45-49.
[13] 刘正伟,解广娟,张春杰,等.海上稠油热采井防砂筛管热应力分析[J].石油机械,2012,40(2):26-29. LIU Zhengwei,XIE Guangjuan,ZHANG Chunjie,et al.A thermal stress analysis of the sand control screen in offshore heavy oil thermal production wells[J].China Petroleum Machinery,2012,40(2):26-29.
[14] 任思齐,康志勤,吕义清.热采井套管热固耦合作用数值模拟分析[J].煤炭技术,2017,36(5):301-303. REN Siqi,KANG Zhiqin,LYU Yiqing.Numerical simulation of thermal-stress coupling in casing of thermal recovery wells[J].Coal Technology,2017,36(5):301-303.
[15] 王兆会,马兆忠.热采井温度对套管性能的影响及预应力值计算方法[J].钢管,2007,36(4):24-27. WANG Zhaohui,MA Zhaozhong.Effect by thermal well temperature on casing properties and calculation method for pretension[J].Steel Pipe,2007,36(4):24-27.
[16] 杨雪春.热处理对稠油热采井专用套管HS110H的组织和性能的影响[J].齐齐哈尔大学学报(自然科学版),2014,30(2):72-76. YANG Xuechun.The impact of heat treatment on thickened oil hot well special casing HS110H organization and property[J].Journal of Qiqihar University(Natural Science Edition),2014,30(2):72-76.
[17] 宋吉水,张国亮,刘绍轩,等.射孔对套管抗挤强度影响[J].辽宁工程技术大学学报(自然科学版),2008,27(4):523-525. SONG Jishui,ZHANG Guoliang,LIU Shaoxuan,et al.Effect produced by perforation on counter-extrusion intensity of casing[J].Journal of Liaoning Technical University(Natural Science),2008,27(4):523-525.

相似文献/References:

[1]闫振来,韩来聚,李作会,等.胜利油田水平井地质导向钻井技术[J].石油钻探技术,2008,36(01):4.
[2]朱炳坤.存在上凸弯曲的水平井眼中钻柱的屈曲分析[J].石油钻探技术,2008,36(01):9.
[3]黄建林,张生军,房 舟,等.致密高压裂缝性气藏超深水平井钻井技术难点与对策[J].石油钻探技术,2008,36(02):22.
[4]狄富春,吕建云,赵立文,等.提高薄油层水平井油层钻遇率的技术研究[J].石油钻探技术,2008,36(02):25.
[5]安永生,吴晓东,韩国庆.智能井技术在五点法井网中的应用[J].石油钻探技术,2008,36(02):64.
[6]袁 昭,李艳明,陶林本,等.吐哈油田水平井随钻地质导向技术研究[J].石油钻探技术,2008,36(03):87.
[7]周生田.水平井水平段长度计算及影响因素分析[J].石油钻探技术,2008,36(05):78.
[8]鲁 港,邢玉德,王 刚,等.水平井实钻轨迹中靶效果分析的偏差率模型[J].石油钻探技术,2007,35(01):20.
[9]吕爱民,姚 军,武兵厂.底水油藏水平井最优垂向位置研究[J].石油钻探技术,2007,35(01):66.
[10]赖枫鹏,李治平,岑 芳,等.水平井水力冲砂最优工作参数计算[J].石油钻探技术,2007,35(01):69.

备注/Memo

备注/Memo:
收稿日期:2017-09-24;改回日期:2018-07-30。
基金项目:国家科技重大专项"渤海油田高效采油工程及配套技术示范"(编号:2016ZX05058-003)资助。
作者简介:于法浩(1990-),男,内蒙古赤峰人,2012年毕业于东北石油大学石油工程专业,2015年获东北石油大学石油与天然气工程专业硕士学位,初级工程师,主要从事管柱力学和管柱设计方面的研究。
E-mail:yufahao2009@163.com。
更新日期/Last Update: 1900-01-01